Lee Pro 6000 Press Kit includes:
- Six pack progressive press
- Auto drum powder measure
- Shell plate
- Universal case feed magazine
- Carbide Lee Breech Lock dies (carbide full length sizing die, powder through expanding die, bullet seating die, and instructions with load data)
Lee SIX PACK progressive 6-hole reloading press. The culmination of nearly 40 years of progressive press design and production.
Years of comments and suggestions have been incorporated into this new press.
The SIX PACK press features:
- Six stations allow any brand of die be used -- in line bullet feed dies, powder check dies and such. (Uses industry standard 7/8"-14 thread)
- Simple and reliable automatic indexing -- just one moving part, replaceable in seconds, no tools required and never requires adjustment.
- Stroke and clearance sufficient for largest magnum rifle cases. Uses the same all steel linkage found on our Classic Cast 50 BMG press.
- Massive 28.4mm ram glides through 82 mm of solid steel giving the ram over 7300 mm2 of solid support.
- All dies securely fastened in the upper die carrier with the LEE Breech lock quick die change system.
No more turret or tool head to replace or move during use. - Automatic priming system - simple, reliable and safe with any brand or size of primer.
Primes at the bottom of stroke so all six stations are available for operations. - Automatic case inserter works with any case. Cases can be manually fed through the convenient loading port.
Includes the Lee case feed magazine, works with most hand gun cases and all AR rifle cases. - Easy to set case retainers on every station. No springs, plugs or buttons to loose or tinker with.
- Cartridge changeover in seconds, including primer size with no adjustments.
- Automatic case ejector reliably whisks away your completed round to the ammo bin.
Press includes combination tool rack, bin bracket, along with free ammo bin.
| Base material | Steel |
| Columns material | Steel |
| Ram | Steel |
| Ram diameter | Over 1" |
| Linkage | Steel |
| Shell plate carrier material | Steel |
| Shell plate carrier cover material | Zamak 5 Zinc |
| Tool head material | Aluminum |
| Die size accepted | 7/8" x 14 |
| Number of die mounting holes | 6 |
| Breech Lock Quick Change bushings | Yes |
| Priming feature | Yes, no primer brand restriction |
| Spent primer collection tube | Yes |
| Country of origin | Proudly made in USA |
The Lee PRO 6000 Six Pack press kit is available in following calibers:
- Lee PRO 6000 - 223 Remington
- Lee PRO 6000 - 9mm Luger
- Lee PRO 6000 - 38 Special / 357 Magnum
- Lee PRO 6000 - 45 ACP
- Lee PRO 6000 - 300 AAC Blackout
- Lee PRO 6000 - 6,5 Creemdoor
- Lee PRO 6000 - 32 S&W Long or 32 H&R Magnum
- Lee PRO 6000 - 380 Auto
- Lee PRO 6000 - 40 S&W/10mm Auto
- Lee PRO 6000 - 44 Special / 44 Magnum
- Lee PRO 6000 - 45 Colt / 454 Casull
The photo is for illustration only.
