TRIEBEL - Bench Rest Necksizing Die .300 PRC

Caliber: .300 PRC

Thread: Standard 1 1/4″-12

BENCH-REST NECK SIZING DIE

The Bench-Rest (BR) Neck Die guides the cartridge case over the full length before the cartridge case will be formed with an interchangeable bushing.

The guide sleeve has the internal contour of the cartridge chamber to cover the cartridge case. The guide sleeve and the body of this reloading die are perfectly matched to ensure exact axial alignment of the cartridge during the sizing process. Of course the Benchrest Neck-sizer has an optional expander and the exchangeable primer ejector pin. This die is the perfect choice for those, who want to leave nothing to chance when reloading.

Especially the dies with 1 ¼"-12 Gg thread are characterized by highest steadiness and durability. The required forces for the sizing process are significantly smaller than with the 1 1/4" -dies.

This protects your reloading press and gives more even results, than the sizing with too weak reloading tools.

• Die body grooves - The grooves on the die body make it easier to install the die in the press.
• High quality finish - The surface of the die is highly polished, the parts of the die are blackened.
• Die engraving - The Triebel dies are laser marked.
• Fixed lock ring - The nut to secure the die is tightened with an Allen screw that does not press on the die thread.
• Adjusting screw - The screw for easy adjustment of the settling die has a metric thread.
• Securing the adjusting screw - The adjusting screw is secured with a sturdy nut.
• Precisely ground and spring-loaded guide sleeve for axial alignment of case and neck calibration ring during calibration procedure
• Precision ground internal expander for calibres with short sleeves as standard in coordinated special shape
• High precision interchangeable neck calibration ring with excellent concentricity.
• Rounded and replaceable decapping ejector pin.

German company TRIEBEL Wafferwerkzeuge Gmbh produces high-quality reloading dies and gunsmithing tools for almost all calibers up to 25mm. Their customized solutions can help in the production of your match ammunition. The reloading dies are manufactured exclusively in Triebel company in Germany!